Testing machine
Home > Products > Testing machine > Testing machine
Product introduction:
Electro-hydraulic servo multichannel loading testing system mainly used in loading test of all kinds of accessories、part assembly、complete machine and building structures multipoint(coordinate) of surface car、aircraft、ships、and construction industry, in order to acquire mechanical property parameter and fatigue life character of parts under the complex stress circumstance. The series testing machine is widely used in industry detection area of aviation 、military industry、colleges、research institution、surface car and construction.
Main technical parameters and specifications
|
specification |
|
|
|
|
|
|
|
|
|
|
Maximum testing force（kN） |
Dynamic state |
10 |
25 |
50 |
100 |
250 |
500 |
1000 |
2000 |
|
Static state |
10 |
25 |
50 |
100 |
250 |
500 |
1000 |
2000 |
|
|
Standard configuration amplitude（mm） |
±75 |
||||||||
|
Measurement degree of accuracy |
Test force |
precede indicating value±1%（micron order precede indicating value±0.5%） |
|||||||
|
amplitude |
precede indicating value±1%FS（micron order precede indicating value±0.5%FS） |
||||||||
|
frequency range（Hz） |
maximum |
100 |
50 |
30 |
20 |
||||
|
minimum |
Depend on the lowest frequency of signal generator of controller |
||||||||
|
Channel number |
According to the user’s requirements |
||||||||
|
Constant voltage servo pump station configuration specification（L/min） |
The specific configuration according to user’s testing requirements or amplitude-versus-frequency curve of testing machine |
||||||||
|
Controller configuration model |
The specific configuration according to user’s testing requirements |
||||||||
